AMOSTECH

A Manufacturer of Slurry Pumps

Amosand®Mission Centrifugal Oil Base Mud Pump

Looking for a Mission centrifugal oil base mud pump?

Amosand® supplies Mission-style centrifugal mud pumps and replacement solutions for oilfield applications. These pumps are used for drilling fluid transfer, mud mixing, and solids control systems.

Oil-based drilling mud may contain barite, drill cuttings, and other solid additives. The pump must match the fluid properties, required flow, and operating head.

6×5 Oil-Based Mud Pump with 75 HP Electric Motor

We recently received an inquiry for a 6×5 centrifugal mud pump with the following specifications.

Parameter Customer Requirement
Pump size 6×5 inch
Motor power 75 HP
Voltage 380 V
Frequency 50 Hz
Motor speed 1,450 RPM
Required flow 880–1,580 GPM
Application Oil-based drilling mud

The requested flow is approximately 200–359 m³/h. Actual performance depends on the pump model, impeller, operating head, and mud properties.

Before selecting a pump, confirm the mud density, viscosity, solids content, and total dynamic head. The motor must also match the actual power demand.

Common Mission Centrifugal Mud Pump Models

Several common Mission Magnum centrifugal mud pump configurations used in oilfield fluid handling include:

Mission Magnum 6×5×14

A centrifugal mud pump configuration for drilling fluid transfer and mud system duties. It is worth considering when reviewing a 6×5 pump replacement or a new oilfield pumping package.

Mission Magnum 5×4×14

A smaller suction and discharge configuration for suitable mud transfer and solids control applications. Selection depends on the required flow and head.

Mission Supercharge 4×3×13

A configuration commonly associated with mud pump supercharging and other compatible oilfield fluid handling duties. Confirm the required inlet conditions and system operating point before selection.

These model designations identify different pump configurations. They do not guarantee a specific flow rate or head for every application. Check the relevant performance curve and installation requirements before ordering.

Main Applications of Centrifugal Mud Pumps

Mud mixing and transfer: Move drilling fluid between tanks and supply mud to mixing funnels and jet mud mixers.

Solids control equipment feeding: Supply compatible drilling fluid to desanders, desilters, mud cleaners, and decanter centrifuges.

Mud pump supercharging: Provide feed flow to compatible triplex mud pump systems when the required inlet pressure and flow are met.

Oilfield fluid handling: Transfer compatible oil-based mud, water-based mud, and other drilling fluids within the pump’s operating range.

Key Features to Consider

When selecting a centrifugal oil-based mud pump, pay attention to the following:

  • Wear resistance: Casing and impeller materials must suit the abrasive solids in the mud.
  • Impeller design: The impeller must match the fluid, solids content, and required performance.
  • Sealing system: Seal materials must be compatible with the oil base, additives, and operating temperature.
  • Motor matching: Check power, voltage, frequency, and rotational speed against the pump requirements.

Proper selection helps reduce premature wear and supports reliable operation.

Mission Centrifugal Mud Pump Replacement

Amosand® supplies Mission-style centrifugal pumps and replacement parts for oilfield applications.

If you need to replace an existing Mission Magnum 6×5×14, 5×4×14, or Supercharge 4×3×13 pump, send us the model number, nameplate, or equipment photos.

We can review the pump configuration, installation dimensions, and required operating conditions to help identify a suitable replacement.

Request a Quote for a Mission Oil Base Mud Pump

Looking for a Mission centrifugal oil base mud pump 6×5 with a 75 HP electric motor?

Contact Amosand® with your required flow, head, mud properties, and motor specifications. We will review your application and help identify a suitable pump configuration.

Website: https://www.mission-pumps.com/

Email:[email protected]

Whatsapp:+86-13633310657

Relate Products:

Mission Magnum 6×5×11 mud mixing pump | 6×5×14 supercharging pump

Mission Magnum 5×4×14 centrifugal desilter pump 

Mission Magnum 4×3×13 sand pump

Amosand is a registered trademark and does not represent or is not in any way affiliated with Mission Magnum of NOV Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Mission Magnum Pumps.Amosand sand pumps and spares are only interchangeable with Mission Magnum pumps and spares.This document is the property of Amosand Pump and can be neither reproduced nor disclosed to a third party without a written authorization.

Product Enquiry

Full Name

Email Id

Phone Number

Additional Description

Product Enquiry

Full Name

Email Id

Phone Number

Additional Description

Thank you! Your submission has been received!

Scroll to Top