AMOSTECH

A Manufacturer of Slurry Pumps

Drilling mud centrifugal pump

Mission Centrifugal Pump mainly supplies to solids control circulating system of oilfield drill rig,and be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer,to assure these equipments work efficiently.Mud Centrifugal pump adopts advanced design theory for pumping drilling fluid or industrial suspension (slurry).Drilling mud centrifugal pump can pump abrasive, viscosity and corrosive liquid. We will provide customers with the best products to meet the needs of different conditions.

Advantages of Mud Centrifugal Pump

  • Spare parts interchangeable with NOV Mission Pump.
  • Pump shell and impeller wear-resisting material.
  • Open impeller,apply to transport high viscosity drilling liquid.
  • Combination seal for a long service life.

Drilling Centrifugal Pump Technical Parameters

ModelPowerFlowLift(m)EfficiencyNPSHElectric
8×6-1475KW320m3/h40m65%550HZ
8×6-12355m3/h43m66%4.860HZ
8×6-1355KW290m3/h33m64%5.550HZ
6×5-12196m3/h48m61%360HZ
6×5-1345KW180m3/h34m60%350HZ
5×4-14149m3/h61m58%4.660HZ
6×5-1237KW160m3/h30m60%350HZ
5×4-12112m3/h45m58%4.660HZ
6×5-1130KW120m3/h21m62%2.550HZ
5×4-12112m3/h37m57%4.660HZ
5×4-1222KW90m3/h30m56%4.550HZ
5×4-10105m3/h30m57%4.260HZ
5×4-1118.5KW90m3/h24m56%4.550HZ
4×3-1255m3/h46m48%460HZ
4×3-1315KW50m3/h40m48%4.550HZ
4×3-1154m3/h35m47%460HZ
4×3-1211KW45m3/h30m47%450HZ
3×2-1228m3/h45m40%3.160HZ
3×2-127.5KW45m3/h24m46%450HZ
3×2-1125m3/h35m41%3.160HZ
3×2-115.5KW20m3/h23m39%350HZ

Mission Centrifugal Pump for Drilling Fluids Solids Control

8×6×14 Mission centrifugal pump applies to over 3000-meter-long drilling rigs.T8×6×11 Mission Centrifugal Pump applies to under 3000-meter-long drilling rigs,also can be can be used to supply mud to triplex mud pump as a filling pump.The 6×5×11,5×4×14 centrifugal sand pump applies to truck-mounted drilling rigs or pocket drilling rigs.The 4×3×13 Drilling mud centrifugal pump is usually used as measuring pump or replenishment pump.The 3×2×13 centrifugal sand pump is usually used as clean water pump.

Amostech is a registered trademark and does not represent or is not in any way affiliated with Mission Magnum of NOV Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Mission Magnum Pumps.Amostech sand pumps and spares are only interchangeable with Mission Magnum pumps and spares.This document is the property of Amostech Pump and can be neither reproduced nor disclosed to a third party without a written authorization.

Product Enquiry

Full Name

Email Id

Phone Number

Additional Description

Product Enquiry

Full Name

Email Id

Phone Number

Additional Description

Thank you! Your submission has been received!

Scroll to Top