AMOSTECH

A Manufacturer of Slurry Pumps

Oil field centrifugal pump for solids control mud systems

There are many kinds of centrifugal pump for various material transfer in various field. The mission drilling mud centrifugal pump is also called as sand pump. Mission Centrifugal pump is widely used for oil and gas drilling mud system,horizontal directional drilling (HDD) fluids transfer. mission Solids Control makes various sizes centrifugal pump to meet for various applications.

Amostech offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.

Impeller is an important part of centrifugal pump to transfer and convert energy. Through the impeller, the mechanical energy of the motor is transformed into pressure energy and kinetic energy. The impeller is composed of front and rear cover plates (impeller discs) and curved blades. According to whether there are front and rear impeller, it is divided into closed type, semi open type and open type impeller.

In general, the pump conveying sundries adopts open impeller. The tank injection pump and sand pump, as well as drilling mud pump adopts semi open impeller, while the slag pump adopts closed impeller. Through investigation, it is found that the most easily worn part of the semi open sand pump impeller is the origin of the blade. Due to the ball impeller out! High strength and uniform wear. At the same time, when the wear increases the gap between the suction end side cover plate and the front side, the performance of the pump is more stable.

Mission centrifugal pumps are designed with the following characteristics. Below are some features of the Solids Control centrifugal pump design:

1. Solids Control centrifugal pump adapts composite mechanical seal. It means the mechanical seal is installed in the inner end of the sealing box, the auxiliary packing seal mounted in the outer end. The double sealing makes the sealing more reliable.

2. The impeller of Solids Control centrifugal pump adapts open vane structure.

The open vane structure impeller reduces the shaft load greatly, and it is running more smoothly and performs more efficiently.

3. Solids Control centrifugal pump is with Higher output and high efficiency. The impeller profile complying with the hydraulic principle, it can increase the output and efficiency.

4.Solids Control centrifugal pump adapts wear-resistant materials for the key parts to prolong the service life

5. More choice. Solids Control offers a variety of pump casing and impeller. It can meet different demands of different customers.

Amostech is a registered trademark and does not represent or is not in any way affiliated with Mission Magnum of NOV Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Mission Magnum Pumps.Amostech sand pumps and spares are only interchangeable with Mission Magnum pumps and spares.This document is the property of Amostech Pump and can be neither reproduced nor disclosed to a third party without a written authorization.

Product Enquiry

Full Name

Email Id

Phone Number

Additional Description

Product Enquiry

Full Name

Email Id

Phone Number

Additional Description

Thank you! Your submission has been received!

Scroll to Top