AMOSTECH

A Manufacturer of Slurry Pumps

Tobee – Model 6x5x14 – Mission 2500 Supreme Pumps Manufacturer

Mission 2500 Supreme Pumps SPECIFICATIONS: • Sizes from 3x2x13 to 10x8x14 • Flow rates from a few gallons per minute up to 2,600 GPM • Head pressure up to 550 feet • Best utilized for applications requiring up to 200 HP The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

  • Most popular related searches
    • truck mounted drilling rig
    • drilling rig
    • centrifugal pump
    • centrifugal pumping
    • triplex mud pump
    • oil based drilling mud
    • drilling centrifuge
    • drilling mud
    • mud pump
    • drilling fluid

 Mission 2500 Supreme Pump Description

Design Features:

• Versatile stuffing box
• Thick, strong, concentric casing with replaceable casing wear pad
• Casing gasket receded for protection.
• Replaceable stuffing box cover with dual stuffing box bolts
• Long-life, no-adjustment mechanical seal available for near zero leakage
• Replaceable shaft sleeve
• Solid Frame base
• Labyrinth seals for maximum bearing protection
• Duplex angular contact bearings
• Full pipe diameter entrance for minimum turbulence and maximum efficiency
• Wide semi-open impeller creates lower axial thrust for improved bearing life
• All sizes feature the same power end  

Typical Configurations:

3x2x13       6x5x14
4x3x13       8x6x11
5x4x14       8x6x14
6x5x11       10x8x14

Typical Applications:

• Barite, ferric oxide, and mineral oil
• Base drilling muds
• Glass fibers
• Sugar processing
• Ash or coal conveyers
• Cement
• Mine de-watering
• Lime slurries
• Kaolin clay
• Crystalline forms

Amostech® offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.

The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6×5×11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.

* Amostech® is a registered trademark and does not represent or is not in any way affiliated with Mission 2500 Supreme® of NOV Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Mission 2500 Supreme Pumps.
* Amostech® sand pumps and spares are only interchangeable with Mission 2500 supreme pumps and spares.
* This document is the property of Amostech® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.

Amostech is a registered trademark and does not represent or is not in any way affiliated with Mission Magnum of NOV Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Mission Magnum Pumps.Amostech sand pumps and spares are only interchangeable with Mission Magnum pumps and spares.This document is the property of Amostech Pump and can be neither reproduced nor disclosed to a third party without a written authorization.

Product Enquiry

Full Name

Email Id

Phone Number

Additional Description

Product Enquiry

Full Name

Email Id

Phone Number

Additional Description

Thank you! Your submission has been received!

Scroll to Top